|
|
Post by max on Dec 1, 2020 1:36:01 GMT
Hi I printed 4 stands of cavalry this morning but got lots of stringing and so am keen to see what others have done to get better prints on FDM printers? ![]()  |
|
|
|
Post by suntzu on Dec 1, 2020 15:38:32 GMT
try slowing your print speed , changing your print temp , i print at 25 mm/s and 205 deg
|
|
|
|
Post by 6mmfan on Dec 2, 2020 2:59:02 GMT
I replied on you other thread but I agree it looks like the temperature is too high.
I printed these on a heavily modified Anet A8  |
|
|
|
Post by charlie on Dec 4, 2020 2:58:55 GMT
I've got an Ender-3 Pro and did some test prints today of various items from the library. They turned out very well.  The only tweak I've done so far is to reduce the retraction distance from 6mm to 4mm. |
|
